top of page
builder-logo.png

BUILDER EXTREME 1500 PRO HC

With a build volume of 1100x500x820mm, the Extreme 1500 PRO Heated Chamber is a fully closed industrial 3D printer made to print large and full scale parts such as molds, tooling and end-use parts. The heated chamber makes it the ideal large format machine for 3D printing industrial applications as the printed materials are heat resistance and extremely strong. The newly developed print head is water cooled and easy to use. The different nozzle diameters allow the user to optimize the print quality and speed for their specific project.

  • Technology
    FDM/FFF (Fused Deposition Modeling)

  • Build volume
    1100x500x820mm (LxWxH)

  • Extruder
    Dual-Feed system developed in-house

  • Layer height resolution
    0.4mm nozzle – 0.2 – 0.3mm
    0.6mm nozzle – 0.2 – 0.5mm
    0.8mm nozzle – 0.3 – 0.7mm

  • Print speed
    Up to 200 mm/s (standard speed 80 mm/s) Depending on geometry of part and nozzle size

  • Travel speed
    up to 300 mm/s

  • Build plate
    Heated aluminium plate up to 100°c

  • Bed leveling
    Manual bed leveling at installation only

  • CE  and UL certified
    Yes

  • Feeder type
    Direct drive

  • Heated chamber
    Up to 70 degrees Celsius

  • Power rating
    Power rating

  • Connectivity
    USB, Wi-Fi, Ethernet

  • Display
    7-inch full colour touchscreen

  • Filament detection
    Yes

  • UPS system
    Possibility to resume print after power failure

  • Safety locking system
    Doors open only after print is paused

heated chamber
Heated bed
Water cooled print head
BOFA air filter
bottom of page