Volume size: 1100x1100x820 mm
Technology: FDM/FFF

The Extreme 3000 PRO is made to deliver 24/7. With the extremely large build volume of 1100x1100x820mm XYZ it is the perfect fit for industrial applications.

With large format 3D printing you have full design freedom and are able to print large parts in one piece. The frame has been designed in a way that you have easy access to the build plate from both sides by removing the side panels.

3 different nozzles diameters, 0.4, 0.8 and 1.2 mm, are included to optimise print quality and time for your specific needs. The machine is fully equipped with features such as a heated bed, filament detection, a battery pack and auto bed levelling.



Dual-Feed Build Size
700x700x1700mm (LxWxH)

Print head

Dual extruder with one nozzle (3 nozzle diameters included)

Print speed

Up to 300 mm/s (standard speed 80 mm/s)
Depending on geometry of part and nozzle size

Travel speed

Up to 500 mm/s

Layer height resolution

0.4 mm nozzle – 0.2 – 0.3 mm
0.8 mm nozzle – 0.2 – 0.7 mm
1.2 mm nozzle – 0.3 – 0.9 mm

Print technology

FFF (Fused Filament Fabrication)

Nozzle diameter

0.4 standard, 0.8 and 1.2 mm are included

Print bed

Heated aluminium plate up to 60°

7 inch full colour touch screen

Feeder type
Direct drive

Power rating

1800 watts (at peak)

Filament detection

UPS system

Uninterruptible power supply resumes
the print after power outage


USB, Wi-Fi, Ethernet

Bed leveling
Automatic bed leveling

On-board camera
Live camera view from desktop or mobile device

Ups system
Resume after power outage


  • PLA 1.75mm

  • PVA 1.75mm

  • Flexibel Filament 1.75mm

  • Pro 1 1.75mm

  • PET 1.75mm

  • Bronzefill/Woodfill 1.75mm


exteme 3000

Extremely large build volume

The Extreme 3000 PRO has an extremely large build volume of 1100x1100x820 mm XYZ. This allows you to print full size prototypes, parts, statues in one piece. The build volume of just under 1 m3 is the perfect size for 3D printing industrial applications.

easy access

Easy access

The Extreme 3000 PRO has been designed to print extremely large parts, but you also need to be able to remove the printed parts easily. That is why the machine has removable panels on the left and right side. By removing the panels, you have easy access to remove prints or do any maintenance to the machine if needed.

extreme 3000 pro builder

Easy to use

Despite the large build volume the machine is easy in its use. The large touch display allows you to have full adjustment control over the machine
while printing. Large format 3D printing becomes easy and worry free with features such as filament detection and a battery pack when there is a power


Different nozzle diameters

The Extreme 3000 PRO comes with 3 different nozzle diameters which allow you to choose the right print quality and time for your specific needs. A 0.4, 0.8 and 1.2 mm nozzle are included with the purchase. The 0.4 mm nozzle is often used for parts that need to be accurate, the 0.8 mm for printing prototypes within days and 1.2 mm for printing parts within several hours and parts that will be post processed.

Call us Today

+44 (0) 1474 550 934