BUILDER EXTREME 2000
Volume size: 700x700x1700
The new Extreme 2000 PRO manages large scale 3D printing to a higher and further professional level. Thanks its big 3D printing volume of 700x700x1700 mm (XYZ), it’s one of the biggest FDM 3D printers available in the market, which makes it the best 3D printing solution for professional and industrial use. From 3D printing prototypes, moulds & tooling the easy to use Builder Extreme 2000 PRO will give you an high quality industrial grade parts time after time.
You can use the The Builder Extreme 2000 PRO to 3D print a variety of prototypes such as very big prototypes, architectural plastics, sculptures & Columns, bas-reliefs, car & motorbike parts and much more.
INTRODUCING THE NEW EXTREME 2000 PRO
It makes prototypes up to 1.7 meters height
Dual-Feed Build Size
Mono or Dual-Feed extruder
Up to 120 mm/s
Up to 120 mm/s
Layer height resolution
0.1 – 0.8 mm
(depending on the nozzle)
FDM/FFF (Fused Deposition Method)
0,4 mm/ 0,8mm/ 1,2mm
up to 70 °C (heated in 10 minutes)
7 inch full colour touch screen
Wi-Fi, USB port, Ethernet
Semi-automatic bed leveling
Live camera view from desktop or mobile device
Resume after power outage
Flexibel Filament 1.75mm
Pro 1 1.75mm
7'' LCC Touchscreen
The 7'' touch screen allows you to have full adjustment control over the Extreme 2000 PRO and the printed prototype. You can check the nozzle, bed temperature and evaluating the filament change. It olso provides instruction videos and useful information. Thanks to the on-board camera you can check the progress of the print. Finally, the Wi-Fi connection allows you to upload the STL files.
The innovative and versatile direct drive extruder has been designed for non-stop printing. The Dual-Feed extruder is able to 3D print dual coloured objects, but can also be used as a normal/mono extruder when inserting 2 of the same filament spools/filaments. The easy to swop nozzle can be replaced for a smaller/bigger nozzle diameter to influence print quality/time.
The fully closed housing combined with the heated bed positively influence the print quality of the printed object but also reduces the sound of the machine by 40%. The transparent doors allow you to monitor the printing process at all times. For safety reasons the doors can only be opened when the print is paused. The Extreme 2000 PRO is air filter ready and the BOFA air filter can be added to the Extreme 2000 PRO as an option.
3D Printer Design
The Extreme 2000 PRO has been designed efficiently to be
able to offer place to all its key features without sacrificing the build volume. Despite its huge print volume, this 3D printer is ideal for all workspaces. The filament spools and control box are fully integrated in the closed housing and will open for easy access, when slightly pushing the panels.